Al-Rafidain Pearl Al-Rafidain PearlAl-Rafidain Pearl
ع
  1. Home
  2. Materials catalogue

Materials catalogue

Every material in the Combo build-up, grouped by layer, with its full technical data, reference standards, packaging and storage. All are certified international products that have passed laboratory testing.

Layer 1 — Insulating foam core

GRANDFOAM SS 45 — Spray polyurethane foam, 45 density
No. 01

GRANDFOAM SS 45

Spray polyurethane foam, 45 density Grandseal · formerly GRAND PU 3045

A polyol formulation for multi-layer spray foam insulation on roofs, walls and basements at 45–48 kg/m³. Contains all raw materials including the blowing agent; CFC-free. Used with MDI on metal, concrete and timber roofs.

Full specifications
PropertyValueUnit / method
Hydroxyl number (theoretical)300 ± 20mg KOH/g
Water content1.00 ± 0.1% by wt.
Viscosity @ 25 °C200 ± 50cps
Specific gravity @ 23 °Capprox. 1.12—
Cream time4 ± 1s
Gel time10 ± 1s
Free rise density30 ± 1kg/m³
Applied density45 – 48kg/m³
Compressive strength275kPa
Tensile strength350kPa
Fire ratingB3DIN 4102-1
Water absorption0.004g/cm²
Thermal conductivity< 0.0240W/m·K · ASTM C518
Working temperature range-40 to 100°C
Closed cell contentmin 92%
Water vapor permeability (5 cm)0.71perms
Packaging & storage220 kg steel drums; IBC, tank truck and tank containers on request. Shelf life 6 months in sealed, moisture-tight containers at 15–25 °C. Limit spray thickness to 2.5 cm per pass. Guide formulation: SS 45 100 / MDI 100 parts by weight.
GRANDFOAM MDI — Isocyanate component for rigid PU foam
No. 04

GRANDFOAM MDI

Isocyanate component for rigid PU foam Grandseal · formerly GRANDPU MDI 250

The isocyanate component for rigid, heat-insulating PU foam. Its composition gives better flowability, suiting systems that demand strict flow.

Full specifications
PropertyValueUnit / method
AppearanceDark brown liquid—
Specific gravity @ 25 °C1.22 – 1.25—
Viscosity @ 25 °C150 – 250mPa·s
NCO content30.2 – 32.0%
Acidity0.05% HCl
Hydrolyzable chlorine0.2%
Packaging & storage210 L iron drums, 250 kg/drum, stored closed indoors in a ventilated area; shelf life 6 months. Use 2:1 transfer pumps; proportioner within ±2% of 1:1 by volume; hose heaters 50–55 °C. Gas mask and respirator essential while spraying.
SYSTEM ISO 44V20L — MDI isocyanate for rigid polyurethane foams
No. 05

SYSTEM ISO 44V20L

MDI isocyanate for rigid polyurethane foams Pearl Polyurethane Systems LLC

A liquid, dark-brown MDI mixture used with polyols to produce rigid polyurethane foam. Must be kept from moisture.

Full specifications
PropertyValueUnit / method
NCO content30.5 – 32.5% by wt.
Viscosity @ 25 °C160 – 240mPa·s
Aciditymax. 200ppm HCl
Density @ 20 °Capprox. 1.23g/cm³ · DIN 51757
Phenylisocyanate contentmax. 50ppm
Coefficient of thermal expansion6.59 × 10⁻⁴K⁻¹
Specific heat (cp)approx. 1.51kJ/kg·K
Packaging & storageDrums, IBCs, tank containers and wagons. Store at +10 to +30 °C; 6 months in moisture-tight drums. May partly crystallise below 0 °C — reliquefy by heating the whole drum briefly to max. 70 °C.
ECOPEARL® SHPU-40-27A — Formulated polyol for spray foam insulation
No. 06

ECOPEARL® SHPU-40-27A

Formulated polyol for spray foam insulation Pearl Polyurethane Systems LLC

A formulated polyol for multi-layer spray foam on roofs, walls and basements at 38–45 kg/m³, used with SYSTEM ISO 44V20L.

Full specifications
PropertyValueUnit / method
Viscosity @ 25 °C300 ± 100mPa·s
Density @ 25 °C1.16 ± 0.02g/ml
Cream time4 ± 1s
Tack free time13 ± 2s
Free rise foam density26 ± 1kg/m³
Applied density38 – 45kg/m³ · ASTM D1622
Compressive strength> 100kPa · ASTM D1621
Closed cell content> 90% · ASTM D6226
Fire ratingB3DIN 4102
Thermal conductivity, initial≥ 0.022W/m·K · ASTM C518
Packaging & storage200 L steel drums; 6 months in sealed containers at 20 ± 5 °C. Guide formulation 100 / ISO 44V20L 108 by weight. Max 1.5 cm per pass; next pass after 5–10 min.

Layer 2 — Rubberised waterproofing

Polycoat RBE 5 — SBS-modified bituminous coating
No. 08

Polycoat RBE 5

SBS-modified bituminous coating Henkel Polybit

A rubber-modified bitumen emulsion that dries to a tough, seamless, flexible vapour-proof coating. Cold-applied and suitable for damp substrates.

Full specifications
PropertyValueUnit / method
ColorDark brown—
Density1.0 ± 0.05g/cc · ASTM D1475
Solid content35 ± 3% · ASTM D2939
Rubber content3% · ASTM D297
Drying time @ 25 °C60min
Application temperature5 to 55°C
Service temperature-5 to 75°C
VOC< 50g/L
Packaging & storage200 L drums. Coverage 4 m²/L/coat at 0.1 mm DFT, 2 m²/L/coat at 0.2 mm. Primer: dilute with 20% water. Store covered out of sun; shelf life 12 months unopened.
GRANDCOAT EM 5 — Cold-applied flexible rubberised bitumen emulsion
No. 09

GRANDCOAT EM 5

Cold-applied flexible rubberised bitumen emulsion Grandseal · formerly GRANDFLEX EM 5

A cold-applied bitumen emulsion modified with elastomeric polymer, drying to a tough, seamless black film. For roofs, walls, floors, bathrooms, kitchens, basements and fountains.

Full specifications
PropertyValueUnit / method
ColorDark brown, dries black—
Density1.02 ± 0.02g/cc · ASTM D1475
Solid content35% · ASTM D2939
Rubber content> 10% · ASTM D297
Elongation600% · ASTM D412
Application temperature5 to 55°C
Service temperature-10 to 80°C
Packaging & storage20 and 200 L units; 2–4 m²/L/coat. Complies with ASTM D1227 Type II and BS 8102. Store covered; air-conditioned storage in hot climates; shelf life ≥ 12 months.

Layer 3 — Geotextile

GRANDGEO 120 — PP non-woven needle-punched geotextile, 120 GSM
No. 10

GRANDGEO 120

PP non-woven needle-punched geotextile, 120 GSM Grandseal

A needle-punched polypropylene non-woven geotextile for levelling and protection under waterproofing membranes. Installs on damp substrates and resists ageing and aggressive soil media.

Full specifications
PropertyValueUnit / method
Mass per unit area120g/m² · ASTM D5261
Thickness1.15mm · ASTM D5199
Wide-width tensile (MD)7.0kN/m · ASTM D4595
Wide-width tensile (CD)6.5kN/m · ASTM D4595
Puncture strength1200N · ASTM D6241
Opening size95µm · ASTM D4751
Permeability2.0s⁻¹ · ASTM D4491
UV resistance> 85 % @ 150 hASTM D4355
Packaging & storageRolls 2.80 / 5.60 m wide × 100 / 200 m. Keep wrapped and off the ground; do not leave exposed to sunlight for more than 3 months before covering.
GEOTEC – 120GSM — Needle-punched, thermally bonded 100% PP geotextile
No. 12

GEOTEC – 120GSM

Needle-punched, thermally bonded 100% PP geotextile Royal Industries LLC · Made in KSA

A thermally bonded, needle-punched 100% polypropylene geotextile for separation, filtration, reinforcement, protection and drainage.

Full specifications
PropertyValueUnit / method
Grab strength MD / CD650 / 650N · ASTM D4632
Elongation at break50 / 50% · ASTM D4632
Tear strength MD / CD300 / 300N · ASTM D4533
Puncture strength340N · ASTM D4833
Static puncture (CBR)1.70kN · ASTM D6241
UV resistance70 / 500% / h · ASTM D4355
Characteristic opening size110µm · ASTM D4751
Thickness1.50mm @ 2 kPa · ASTM D5199
Weight120g/m² · ASTM D5261
Packaging & storageRolls 3.0 / 6.0 m × 100 m (300 / 600 m², approx. 42 / 84 kg). Durable for at least 25 years in natural soil (4 < pH < 9). Cover within 2 weeks of installation.

Layer 4 — Joint boards

GRANDBOARD JF — Bitumen-impregnated fibre board for expansion joints
No. 11

GRANDBOARD JF

Bitumen-impregnated fibre board for expansion joints Grandseal

A flexible, compressible, non-extruding bitumen-impregnated fibre board for expansion joints in concrete and masonry, also protecting membranes from mechanical damage.

Full specifications
PropertyValueUnit / method
Thickness10 / 12 / 15 / 18mm ± 1.2
Density201.30kg/m³
Bending strength1.60N/mm² (≥ 1.1)
E-Module205.05N/mm²
Water absorption (2 h)32.92% (≤ 35)
Swelling (2 h)2.94% (≤ 6)
StandardsASTM D1751 / D545 / D994—
Packaging & storageSheets 1200 × 2400 mm in 10, 12, 18 and 25 mm. Shelf life 2 years stored covered, cool and dry. No health hazards in normal use.
Polyboard — Bitumen-impregnated compressible fibre filler board
No. 13

Polyboard

Bitumen-impregnated compressible fibre filler board Henkel Polybit

A bitumen-impregnated natural wood-fibre board for expansion joints with excellent recovery after compression and good thermal insulation. Free of asbestos and lead.

Full specifications
PropertyValueUnit / method
Density> 220kg/m³
ColorBrown—
Max. extrusion @ 50% compression< 1mm · ASTM D1751
Recovery @ 50% compression> 70% · ASTM D1751
Compression @ 50%> 100psi · ASTM D1751
BrittlenessNo crackASTM D994
Bitumen content10% · ASTM D545
Packaging & storage12, 19 and 25 mm boards, 1180 × 2250 mm. Store cool, dry and shaded on a flat pallet. Complies with ASTM D1751; production to DIN EN 13986 / DIN EN 622-4.

Flexible cementitious membranes

GRANDFLEX 60 — Two-component, polymer-modified flexible cementitious waterproofing
No. 21

GRANDFLEX 60

Two-component, polymer-modified flexible cementitious waterproofing Grandseal · formerly GRANDFIX 60

A two-component, acrylic-modified flexible cementitious waterproofing system for pools, bathrooms, kitchens, drinking-water tanks and basements, with a barrier to salts and chlorides.

Full specifications
PropertyValueUnit / method
Density1.7g/cc
ColorGrey, white—
ToxicityNon-toxic—
Tensile strength> 7.8N/mm²
Flexibility (1.5 mm)30%
Elongation60%
VOC< 1.20g/L
Water penetration7 bar (2 mm DFT)DIN 1048
Chloride ion diffusivityZero at 90 days—
Packaging & storage20 kg kit: Part A powder 15 kg, Part B liquid 5 kg. 2 kg/m²/mm in two coats (1.2–1.5 then 0.8–1.0 kg/m²). BS 1881 Part 5; DIN 1048 Part 5. Shelf life 12 months, covered.
Polyflex — Acrylic-modified cementitious waterproofing coating
No. 23

Polyflex

Acrylic-modified cementitious waterproofing coating Henkel Polybit

A two-part acrylic-modified cementitious coating protecting concrete from water, vapour, chlorides and acidic gases, curing to a tough flexible film. For wet areas, pools and water tanks.

Full specifications
PropertyValueUnit / method
ColorGrey / white—
Mixed density1.8 ± 0.02g/cc · ASTM D1475
Pot life45min
Tensile strength> 8N/mm² · ASTM D412
Elongation> 50% · ASTM D412
Adhesion strength> 0.5N/mm² · ASTM D4541
Crack bridging> 0.5mm · ASTM C836
Hydrostatic pressure (5 bar)No leakageBS EN 12390-8
ToxicityNon-toxicBS 6920 (WRAS)
Reaction to fireClass AASTM E84
Service temperature-5 to 70°C
Packaging & storage20 kg kit: 15 kg powder + 5 L liquid, mixed 3:1 by weight. Two coats, min. 2 mm; 1.8 kg/m² per coat per 1 mm DFT. Glass-fibre mesh at corners; wet-cure for 72 h.

Joint sealants & backing

GRANDSUPER PU — High-performance flexible polyurethane sealant
No. 14

GRANDSUPER PU

High-performance flexible polyurethane sealant Grandseal

A single-component, moisture-curing elastomeric polyurethane sealant forming a strong, weatherproof joint with excellent adhesion; accommodates ±30% movement.

Full specifications
PropertyValueUnit / method
ColorWhite, off-white, grey, black—
Tack free time1h
Skin over time25 – 35min
Density1.30kg/L · ASTM D1475
Curing time2 – 3mm / 24 h
Shore A hardness30 ± 3ASTM C661
Elongation at break500% · ASTM D412
Movement capability± 30% · ASTM C719
Service temperature-40 to 200°C
Peel strength, concrete> 30N · ASTM C794
VOC< 5g/L
Packaging & storage600 ml sausages. Yield L = 600 / (W × D). Max. joint width 25 mm. ASTM C920 Type S Grade NS Class 25; BS 4254, BS 5215, BS EN ISO 11600. Shelf life 12 months at 5–25 °C.
Polyrod — Closed-cell polyethylene backing rod
No. 15

Polyrod

Closed-cell polyethylene backing rod Henkel Polybit

A closed-cell, non-absorbent, chemically inert polyethylene foam rod used behind sealants to keep the correct joint width-to-depth ratio.

Full specifications
PropertyValueUnit / method
ColorWhite / grey—
Density0.03 ± 0.005g/cc
DurabilityExcellent—
Dimensional stabilityExcellent—
Service temperature-40 to 70°C
StandardsASTM C1330 Type C—
Packaging & storageØ 6, 10, 15, 20, 25, 30, 40, 50 mm. Choose a rod at least 20% (max. 33%) larger than the joint width. Store cool and dry, away from heat.
GRANDCELL — Closed-cell polyethylene backing rod
No. 16

GRANDCELL

Closed-cell polyethylene backing rod Grandseal · formerly GRANDCELL BR

A flexible, readily compressible closed-cell polyethylene backing strip for expansion joints that also acts as a bond breaker.

Full specifications
PropertyValueUnit / method
ColorWhite, grey—
Density~ 40kg/m³
Elongation150%
Tensile strength0.4N/mm²
Compression strength0.03N/mm²
Operating temperature-40 to +80°C
Recovery valueavg. 95%
Water absorptionNil—
Packaging & storageØ 6–50 mm; 360 m rolls (15 mm), 200 m (20 mm). Size 20% larger than the joint width.
Flexseal PU440 — One-component, non-sag, high-modulus PU sealant
No. 17

Flexseal PU440

One-component, non-sag, high-modulus PU sealant Don Construction Products (DCP)

A one-component, solvent-free, non-sag, high-modulus polyurethane sealant curing with air humidity to a tough elastic seal; for vertical and horizontal joints.

Full specifications
PropertyValueUnit / method
ColorWhite, grey, beige—
Specific gravity1.47 ± 0.05—
Shore A hardness25 ± 5 (48 h) / 40 ± 5 (7 d)ASTM C661
Service temperature-20 to 70°C
Tack free time1 – 2h · ASTM C679
Elongation at break≥ 400% · ASTM D412
Tensile strength≥ 1.7MPa · ASTM D412
Movement accommodation± 25% · ASTM C719
Elastic recovery> 80% · ISO 7389
VOC≤ 10g/L
Packaging & storage600 ml sausages (300 ml on request); store unopened at 4–30 °C, dry; shelf life 12 months. ASTM C920 Type S Grade NS Class 25; EN 15651-1.

Top coats

LASTOFLEX-PU — One-component liquid-applied polyurethane roof coating
No. 18

LASTOFLEX-PU

One-component liquid-applied polyurethane roof coating Elastotet S.A.

A one-component liquid polyurethane roof coating that cures with atmospheric humidity to a strong, elastic, watertight membrane — suited to ponding water and PU-foam roofs. Expected working life 25 years (ETAG 005, W3).

Full specifications
PropertyValueUnit / method
Dynamic viscosity (23 °C)2000 – 3000mPa·s · EN ISO 3219
Density1.45g/cm³
Temperature resistance-40 to 90°C
Max. short-term temperature220°C
Elongation at break780% · DIN 53504
Tensile strength4.1N/mm² · DIN 53504
Hardness Shore A81DIN 53505
Water vapour permeability13.1g/m²/day · EN 1931
Impermeability to waterWatertightEN 1928
Adhesion on concrete (primed)> 2N/mm²
Packaging & storage1, 6 and 25 kg lids. Min. 1.1–1.3 L/m² (1.5–1.8 kg/m²), max. 0.7–0.8 kg per coat; cure 12–24 h. Broof t4 (EN 13501-5). Primer VL recommended on concrete.
HYPERDESMO® (Classic) — Polyurethane liquid membrane for waterproofing & protection
No. 22

HYPERDESMO® (Classic)

Polyurethane liquid membrane for waterproofing & protection Alchimica · ETA-04/0082 · BBA 18/5567

A one-component, low-viscosity polyurethane that has been the waterproofing industry standard for 30+ years, curing with humidity to a highly elastic, strongly adhering membrane.

Full specifications
PropertyValueUnit / method
Viscosity (Brookfield) @ 25 °C3,000 – 6,000cP · ASTM D4287
Specific weight @ 20 °C1.35 – 1.45g/cm³
Flash point35°C · ASTM D93
Tack free time4h
Recoat time6 – 24h
Service temperature-40 to 90°C
Hardness> 60Shore A
Tensile strength> 6N/mm² · ASTM D412
Elongation> 500% · ASTM D412
Adhesion to concrete> 2N/mm² · ASTM D4541
Packaging & storageTwo coats of 0.75–0.9 kg/m² (min. total 1.5–1.8 kg/m²). 1, 6, 15, 25 kg. Shelf life ≥ 12 months at 5–25 °C. EOTA/BBA: W3 (25 years), climatic zone S, Broof (t1–t4).

Primers & ancillaries

AQUADUR — Two-component water-based epoxy coating / primer
No. 20

AQUADUR

Two-component water-based epoxy coating / primer Alchimica

A two-component water-based epoxy used as the HYPERDESMO primer for 20+ years, certified as a Class III water and humidity barrier for negative pressure and rising damp. Zero VOC.

Full specifications
PropertyValueUnit / method
Viscosity (Brookfield) @ 25 °C100 – 300cP · ASTM D2196
Specific weight @ 20 °C1.0 – 1.1g/cm³
Hardness90Shore A
Mixing ratio (clear / coloured)1:3 / 1:4A:B by weight
Tack free time5 – 6h
Full cure7days
Pot life1h @ 25 °C
Water vapour transmission3.9 — Class IIIg/m²·24h · EN ISO 7783-2
Adhesion to concrete> 3N/mm² · ASTM D4541
Packaging & storageAs primer 150–200 g/m² in 1–2 coats; as humidity barrier 500–600 g/m² in 3 coats. Do not apply below 12 °C. Clear 4 and 10 kg; white 5 and 10 kg; 24 months at 5–25 °C.
ELASTOTET PRIMER VL — Liquid primer for porous substrates
No. 19

ELASTOTET PRIMER VL

Liquid primer for porous substrates Elastotet S.A.

A liquid primer that improves adhesion of ELASTOTET products on porous substrates such as brickwork, concrete and timber, and under PU floor coatings.

Full specifications
PropertyValueUnit / method
Dry contents45%
Specific gravity1.02g/ml
Coverage8 – 10m²/kg
Application temperature+5 to +30°C
Storage stability6 monthsclosed, +5 to +30 °C
Packaging & storage1 and 0.5 kg tins. Apply thin on clean, dry, dust- and grease-free substrate. Overcoat LASTOFLEX-PU after 15 min, max. 3 h.

Technical values reproduced from the manufacturers’ data sheets.

Request a site survey

Your next roof starts with an engineering survey

Our engineers visit the site, fix drain, service and load positions, and set the requirements before any spraying starts.