Protect your homewith the Combo System
Combined thermal, waterproof and acoustic insulation for roofs: high-pressure sprayed polyurethane foam under seven protective layers, applied in sequence and handed over with a signed flood-test report.
years of system service in the Gulf
cut in cooling electricity
layers in every build-up
villas delivered in Baghdad & Najaf
Mobile field spray unit
An Iraqi company built around one promise: a roof that doesn’t leak
We are a branch of Al-Rafidain Pearl, specialised in thermal and waterproof insulation with current-generation materials. The system has been in service in the UAE for more than twenty-five years; we brought it to Iraq and have applied it on major residential developments. Developers now choose it over traditional tiled (Shtayker) roofing for technical and economic reasons.
- SINCE
- System track record of 25+ years in the Gulf market
- SCOPE
- Combined insulation · waterproofing · roof remediation
- BASE
- Baghdad — Abu Nuwas St., near Palestine Hotel
- REACH
- Baghdad · Najaf · the governorates
Eight layers, each doing a job no other layer can
Hover or tap a layer to see what it does. The order is fixed: each layer depends on the one beneath being cured and bonded.
Sprayed polyurethane foam
The core of the system, sprayed in passes of no more than 2.5 cm to full thickness. Closed cells insulate against heat, water and sound at once.
Liquid rubberised coating
A rubber-modified bitumen film applied straight onto the foam: the first waterproof line, sealing any surface pores.
Geotextile separation layer
Separates and protects the coating from the screed, preventing abrasion and puncture and spreading stress.
Unreinforced screed
Poured and power-floated so water runs to the drains, divided by fibre-board expansion joints.
Exterior primer
A UV- and weather-resistant base coat that seals the screed and improves top-coat adhesion.
Movement joint
Cut open seven days after pouring, then filled with closed-cell backer rod and elastic polyurethane to absorb movement.
Top coat
The final epoxy or polyurethane coat: reflective, UV- and weather-resistant, protecting everything beneath.
Perimeter fillet
A 45° sand-cement fillet along parapets, upstands and light wells, finished with mesh tape.
Nine service lines
From villa roofs to rooftop helipads: waterproofing and thermal insulation for every surface exposed to water and sun.

Combo system
The full eight-layer build-up for building and villa roofs: thermal, waterproof and acoustic insulation in one application.

Bathroom waterproofing
Two crossed coats of flexible cementitious membrane, sealed pipe penetrations and fillets, then a 24-hour flood test.

Balcony waterproofing
45° fillets, mesh tape at the walls and dammed door openings before coating — the edge is where leaks begin.

Fountain waterproofing
Flexible membranes built for permanent immersion and water pressure, for garden and façade fountains.

Swimming-pool waterproofing
Polymer-modified cementitious membranes resisting water penetration up to 7 bar and chloride attack, for walls, floors and steps.

Kitchen waterproofing
An under-tile waterproof layer for wet zones with careful detailing at drains and pipes.
Why Combo instead of tiled roofing?
Excellent thermal break
Insulates the whole slab, while tiled roofing stays weak because its polystyrene is laid loosely.
Saves up to 40% on electricity
Heat gain through the roof drops sharply, so air-conditioning runs less and the power bill falls.
Longer life for AC units
Shorter running hours extend HVAC service life and cut maintenance cost.
Multiple lines of waterproofing
Combo relies on several redundant waterproof lines; tiled roofing has one weak, short-lived line.
Leaks are easy to locate
A failure can be found and fixed locally, where tiled roofs may need a full strip-out.
Lighter on the structure
Lower dead load than tiled screed roofs.
Environment-friendly
CFC-free, with materials certified under green-building schemes.
UV-resistant top coat
The reflective top coat resists UV and weather.
Fast rainwater run-off
A smooth, correctly sloped surface drains quickly.
Robust movement joints
Joints that hold up under thermal cycling, unlike tiled-roof joints.
Long life, no scheduled maintenance
No periodic maintenance, unlike tiled roofing.
Mid-range price
Certified international materials at a mid-range price.
Delivered projects
Eight residential compounds and cities in Baghdad and Najaf, all built with the same Combo build-up and the materials in our catalogue.
Materials verified by independent laboratories
Your next roof starts with an engineering survey
Our engineers visit the site, fix drain, service and load positions, and set the requirements before any spraying starts.